PP meltblown non-woven fabric for disposable masks

PP Melt Blown Nonwoven Fabric for Disposable Face MaskIn the market, there are two main types of common materials, one is general needle punched felt material, another typical material is mesh material which material of Nylon, polypropylene, and polyester. While some special melt blown material can only be provided by few profes

Featured Products

PP Melt Blown Nonwoven Fabric for Disposable Face Mask

In the market, there are two main types of common materials, one is general needle punched felt material, another typical material is mesh material which material of Nylon, polypropylene, and polyester. While some special melt blown material can only be provided by few professional companies.
 
PPSG & PESG are standard materials for Filterek, and both are the representative products of felt. As the filter products for liquid, its definition of micro rating is not that easy which counts on the thickness and the surface smooth of the felt, but on complex internal fiber proportioning. Filterek use nearly 30 kinds of fibers with different diameter, adopt advanced fiber mixture equipment to manufacture accurate micro rating needle felt. Due to the wider variety of the material and the smaller quantity of each product, compared with those mono-fiber products, the professional material price will be more expensive.
 
To reduce the users' cost, we particularly developed the economical products such as PPB & PEB according to some industries with considerate quantity. If the quantity of the order is big enough , the price can be low enough.
 
However, anyway, Filterek will secure that the materials we used in any application area are all 100% original raw material, and Filterek will strongly reject to adopt recycled material which may take security risk, as we can see which will produce poisonous substance that damage the stability of the products and do harm to public.
 
Filterek has extended the mesh materials, except common Nylon mesh, we also developed two mesh products with special application with painting grade , food and pharmaceutical grade. In painting and colorant process, the material must be silicon free, oil & grease free, and fiber free. In food and pharmaceutical process, some usual Nylon mesh products will be forbidden by the security. We strictly define different material application for customer special requirement. Also we can provide Polypropylene and Polyester monofilament products with richer chemical compatibility. All products for filtration adopts cross pointed fixed monofilament material instead of multifilament or uncross shot mesh products, which can gaining stable micro rating accuracy during filtration.
 
Polypropylene melt blown material is the decisive material for high-quality filter bags. No matter for absolute products or oil-adsorbent products, this technology is the most essential to make these products. Owing to Filterek's master of the basic material patented technology, our products can rapidly cover the international leading products market.
 
Filter Bag Code Identification
PPSG - Standard single layer polypropylene felt/Single side glazed/Nominal rating, Removal Efficiency>85%
PPEX- Life extended single layer polypropylene felt/Single side glazed/Nominal rating, Removal Efficiency>85%
PPX - Life extended multi layers polypropylene/Special fiber protective layer/Nominal rating, Removal Efficiency>85%
PPXG- Life extended double layers polypropylene felt /Outer side glazed/Nominal rating, Removal Efficiency>95%
PPAB- Polypropylene oil absorb and adsorb material/Alternate with FSI POMF series products/Nominal rating, Removal Efficiency>95%
PPMD-High removal efficiency and excellent oil absorb and adsorb polypropylene multi layers /Absolute rating/Removal Efficiency>98%
PPD - Special code for customer designation Polypropylene Multi-layers, Every code designed after special analysis of customer's process And the
configuration
APM- Polypropylene multi media/Absolute rating/Removal Efficiency>98%, APM300 alternate with EATON's 100 series products& APM900 alternate with
EATON's 500 series products
APTM- Polypropylene multi media/Absolute rating/Removal Efficiency>98%, APTM300 alternate with 3M's 100 series products& APTM900 alternate with
3M's 500 series products
BMAX- Polypropylene standard bag insert seamless cores for high removal efficiency and pre-filtration/Nominal rating, Removal Efficiency>95%, Alternate
with FSI's MAX series products.
BMOS-Polypropylene Seamless Bags with fiber protective layers outside/Absolute rating/Removal Efficiency>98%, Alternate with FSI's BOS series products.
PESG- Standard single layer polyester felt /Single side glazed/Nominal rating, Removal Efficiency>85%
PEEX- Life extended single layer polyester felt /Single side glazed/Nominal rating, Removal Efficiency>85%
PEX - Life extended multi layers polyester /Special fiber protective layer/Nominal rating, Removal Efficiency>85%
PEXG- Life extended double layers polypropylene felt /Outer side glazed/Nominal rating, Removal Efficiency>95%
PEB -Batch order single layer polyester felt /Single side glazed/Nominal rating, Removal Efficiency>85%
PED -Special code for customer designation Polyester Multi layers, Every code designed after special analysis of customer's process And the configuration
NLMO- Standard Nylon mesh for painting degree/Absolute rating/Removal Efficiency>95%
NLMP-Standard Nylon 66 mesh for food and pharmaceutical/Absolute rating/Removal Efficiency>95%
NLMB- Standard Nylon mesh/Absolute rating/Removal Efficiency>95%
NMD - Special code for customer designation Nylon mesh Multi layers
Every code designed after special analysis of customer's process And the configuration
PEMO- Standard Polyester mesh/Absolute rating/Removal Efficiency>95%
PPMO- Standard Polypropylene mesh/Absolute rating/Removal Efficiency>95%
ACBX- Granular Activated Carbon/Nominal rating, Removal Efficiency>85%


 
Specification

Available Material
 
PP Felt, PE Felt

Seal Ring Material
 
PP, PE, Zinc plated steel ring,  Stainless steel ring

Seam type
 
Welded Seam,  Stitched Seam


Micron Rating
 
PP: 1um~ 200um
PE: 1um~ 200um




Size



 
1#: 7"x16"
2#: 7"x32"
3#: 4"x9"
4#: 4"x15"
5#: 6"x20"

Bottom Shape
 
Semi-Circle & V-Triangle

Others
 
Customize Available


Applications:
* Auto coating & paint
* Water purification & processing
* Pharmaceutical
* Food & beverage
* Bulk & fine chemicals
* Electronics


 
Certificate
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 

PP Melt Blown Nonwoven Fabric for Disposable Face Mask
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
PP Melt Blown Nonwoven Fabric for Disposable Face Mask
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours